High quality material
This tire cover is exactly what I needed to protect my Hummer H2 spare tire. The powder-coated ring is stylish and durable, and the cover is made of high-quality material. Highly recommend!
Hummer H2 (05-10) Hard Spare Tire Cover - Black Powder Coated Ring
(1)
Write a Review
Write a Review
Boomerang
Hummer H2 (05-10) Hard Spare Tire Cover - Black Powder Coated Ring
- SKU:
- MB-HLP-[CLR]
MasterSeries Hard Tire Cover with Color-Matched Plastic Face & Black Powder-Coated Steel Ring is designed specifically for the Hummer H2 models from 2005 to 2010
Boomerang MasterSeries™ Hard Tire Covers feature a lockable black powder-coated stainless steel ring and color-matched plastic faceplate. The black powder-coated stainless steel ring gives your Hummer H2 a distinctively upscale look while protecting your spare tire. Available for all factory size H2 spare tires: 315/70R17 or 305/60R20. This item is backed by our standard 3 year limited warranty. Available in all 2005-2010 factory Hummer H2 colors.
How to find your Hummer Paint Code
| Black Powder-coated Ring | Stainless Steel Lock | Official Licensed Accessory | |
 |
 |
 |
 |
Features:
- Lockable black powder-coated steel ring
- Color-matched plastic face-plate
- Superior protection for your spare tire
- Available in all factory H2 colors
- 3 year warranty
Options:
- Replacement Chrome Dome - $35
- Available for 315/70R17 or 305/60R20 size spare tires
Fits:
- 2005-2010 Hummer H2 SUV (w/spare tire mounted license plate)
- 2005-2010 Hummer H2 SUT
Important Information:
- This cover is designed to re-use the Chrome Dome license plate light cover that comes standard on your H2's rear license plate carrier. Simply unclip the Chrome Dome and snap into the tire cover. If required, a replacement chrome dome is available for $35.
- This tire cover is only compatible with 2005-2010 Hummer H2 and SUTs with spare tire mounted license plates. If your Hummer has an aftermarket tire carrier and bumper mounted license plate, see our 2002-2004 H2 MasterSeries Tire covers.
- YOU MUST SELECT CORRECT TIRE SIZE OR THE TIRE COVER WILL NOT FIT PROPERLY. Please contact us if you need assistance.
MasterSeries Hard Tire Covers for the 2005-2010 Hummer H2 are also available with:
 |
3 years
- 215: This is the tire width in millimeters, measured from sidewall to sidewall.
- 65: This is the aspect ratio. It's the ratio of the height of the tire's cross-section to its width. The number '65' means that the height is equal to 65% of the tire's width.
- R: This letter stands for radial, which means the layers of fabric run radially across the tire. This is standard for most automobiles.
- 15: This is the wheel diameter, or the size of the wheel measured from one end to the other. It tells you the size of the wheel that the tire is intended to fit. The number '15' means the tire is designed to fit on a wheel with a 15-inch diameter.
- 215: This is the tire width in millimeters, measured from sidewall to sidewall.
- 65: This is the aspect ratio. It's the ratio of the height of the tire's cross-section to its width. The number '65' means that the height is equal to 65% of the tire's width.
- R: This letter stands for radial, which means the layers of fabric run radially across the tire. This is standard for most automobiles.
- 15: This is the wheel diameter, or the size of the wheel measured from one end to the other. It tells you the size of the wheel that the tire is intended to fit. The number '15' means the tire is designed to fit on a wheel with a 15-inch diameter.
Boomerang has been designing and manufacturing premium tire covers in Colorado since 1995. We are the only American company to offer both aftermarket Soft and Hard Shell tire covers for vehicles including the Ford Bronco, Jeep Wrangler, Land Rover Defender and Hummer. We use only the finest raw materials including premium engineered OEM automotive tire cover vinyl (not cheap marine grade vinyl). You can buy with confidence because you are buying directly from the manufacturer and Boomerang offers an industry leading 3-year warranty on all our products.
Boomerang is the only company to offer an injection molded, three-piece Camera Port for the Ford Bronco. Unlike misleading claims from competitors, Boomerang designed and engineered our Camera Port specifically for the Ford Bronco back-up camera. Our exclusive patent-pending design is the only available Camera Port that features a molded rubber liner that seals ours tire covers (both soft and hard shell) securely to the camera stem providing a clean finished look while keeping moisture and debris out.
This is another reason why Boomerang Bronco tire covers are simply the best available tire covers available.
We offer two categories of hard tire covers with our MasterSeries and Rigid product lines.
Our MasterSeries tire covers are our top-of-the line fully hard-shell tire covers. They feature a painted-to match molded thermoplastic face and a locking stainless-steel ring that is available in 3 finishes: Polished stainless, black-textured power coat, or fully painted-to match.
The Rigid series features the same molded thermoplastic face that is instead sewn to a heavy-duty automotive grade vinyl band that covers the tire tread. Rigid covers are available in painted-to-match or black textured, with or without printed graphics.
Our tire covers are 100% compatible with the High Altitude edition Jeep Wrangler. However, you must first remove the factory installed drip pan that is located under the spare tire. The drip pan is to keep tire oils from dripping on the color-matched bumper. Your Boomerang tire cover will perform this same function. To remove the drip pan, first remove the spare tire from the spare tire carrier, then the drip pan will easily slide off. After the pan is removed, reinstall your spare tire and new Boomerang tire cover!
-Locate the Tire Information: The tire size information is located on the side of your tire, and it's referred to as the tire code. It typically looks something like this: P215/65R15.
-Decode the Tire Information: This series of letters and numbers may seem confusing at first, but they all have specific meanings:
-Check the Door Jamb: Alternatively, if you haven’t made any modifications to your stock tires, you may be able to find tire size information on a sticker inside the driver-side door jamb or the glove box door.
Because your color-matched tire cover is custom painted to order it is important to choose the correct color code for your vehicle.
Please click on the links below to learn how to find your correct paint code for your vehicle.
Select Your Vehicle:
If you are still unable to locate your color or your vehcle is not listed here, please contact us for assistance.
We have tire covers that will fit all non-back-up camera specific spare tires and guarantee our back-up camera tire covers will work properly with all original equipment factory spare tire/wheels. However, aftermarket wheels and tires may or may not be compatible with our back-up camera specific tire covers for the Jeep Wrangler JL and Ford Bronco, especially if your aftermarket wheels have an offset that results in the back up camera being set back further in the wheel.
Orders for most of our stock (unpainted) items will generally ship within 48 business hours. Because painted-to-match Rigid and MasterSeries tire covers are custom painted to order, please allow 2-3 weeks to complete your order. This time can vary depending on seasonal demand so please be patient. We promise it will be worth the wait.
Our MasterSeries hard shell tire covers come standard with a keyed locking latch. Tire cover lock kits are available for our Rigid and Soft tire covers but must be ordered at the same time.
There have been isolated incidents of soft covers being sucked off by HIGH power car washes but never a MasterSeries. So the short answer is NO, you do not need to remove your tire cover when you wash your vehicle.
Our tire covers are designed to look fantastic and install easily. Installation varies between our soft, Rigid and MasterSeries tire covers and between different vehicle makes. Please visit our Installation Video gallery to find an installation video specific to your vehicle and Boomerang Tire Cover.
Of course we do! And we design and manufacture them in the USA!
Boomerang has been designing and manufacturing premium tire covers in Colorado since 1995. We are the only American company to offer both aftermarket Soft and Hard Shell tire covers for vehicles including the Ford Bronco, Jeep Wrangler, Land Rover Defender and Hummer. We use only the finest raw materials including premium engineered OEM automotive tire cover vinyl (not cheap marine grade vinyl). You can buy with confidence because you are buying directly from the manufacturer and Boomerang offers an industry leading 3-year warranty on all our products.
Boomerang is the only company to offer an injection molded, three-piece Camera Port for the Ford Bronco. Unlike misleading claims from competitors, Boomerang designed and engineered our Camera Port specifically for the Ford Bronco back-up camera. Our exclusive patent-pending design is the only available Camera Port that features a molded rubber liner that seals ours tire covers (both soft and hard shell) securely to the camera stem providing a clean finished look while keeping moisture and debris out.
This is another reason why Boomerang Bronco tire covers are simply the best available tire covers available.
We offer two categories of hard tire covers with our MasterSeries and Rigid product lines.
Our MasterSeries tire covers are our top-of-the line fully hard-shell tire covers. They feature a painted-to match molded thermoplastic face and a locking stainless-steel ring that is available in 3 finishes: Polished stainless, black-textured power coat, or fully painted-to match.
The Rigid series features the same molded thermoplastic face that is instead sewn to a heavy-duty automotive grade vinyl band that covers the tire tread. Rigid covers are available in painted-to-match or black textured, with or without printed graphics.
Our tire covers are 100% compatible with the High Altitude edition Jeep Wrangler. However, you must first remove the factory installed drip pan that is located under the spare tire. The drip pan is to keep tire oils from dripping on the color-matched bumper. Your Boomerang tire cover will perform this same function. To remove the drip pan, first remove the spare tire from the spare tire carrier, then the drip pan will easily slide off. After the pan is removed, reinstall your spare tire and new Boomerang tire cover!
-Locate the Tire Information: The tire size information is located on the side of your tire, and it's referred to as the tire code. It typically looks something like this: P215/65R15.
-Decode the Tire Information: This series of letters and numbers may seem confusing at first, but they all have specific meanings:
-Check the Door Jamb: Alternatively, if you haven’t made any modifications to your stock tires, you may be able to find tire size information on a sticker inside the driver-side door jamb or the glove box door.
Because your color-matched tire cover is custom painted to order it is important to choose the correct color code for your vehicle.
Please click on the links below to learn how to find your correct paint code for your vehicle.
Select Your Vehicle:
If you are still unable to locate your color or your vehcle is not listed here, please contact us for assistance.
We have tire covers that will fit all non-back-up camera specific spare tires and guarantee our back-up camera tire covers will work properly with all original equipment factory spare tire/wheels. However, aftermarket wheels and tires may or may not be compatible with our back-up camera specific tire covers for the Jeep Wrangler JL and Ford Bronco, especially if your aftermarket wheels have an offset that results in the back up camera being set back further in the wheel.
Orders for most of our stock (unpainted) items will generally ship within 48 business hours. Because painted-to-match Rigid and MasterSeries tire covers are custom painted to order, please allow 2-3 weeks to complete your order. This time can vary depending on seasonal demand so please be patient. We promise it will be worth the wait.
Our MasterSeries hard shell tire covers come standard with a keyed locking latch. Tire cover lock kits are available for our Rigid and Soft tire covers but must be ordered at the same time.
There have been isolated incidents of soft covers being sucked off by HIGH power car washes but never a MasterSeries. So the short answer is NO, you do not need to remove your tire cover when you wash your vehicle.
Our tire covers are designed to look fantastic and install easily. Installation varies between our soft, Rigid and MasterSeries tire covers and between different vehicle makes. Please visit our Installation Video gallery to find an installation video specific to your vehicle and Boomerang Tire Cover.
Of course we do! And we design and manufacture them in the USA!
